BHO

Hardware and techniques: joints, pipes and vaporisers.
Post Reply
macky
Posts: 1459
Joined: Fri 14th Mar 2014 12:13 pm
Location: great white north

BHO

Post by macky » Fri 16th Feb 2018 10:16 pm

Have some friends buying oven ,vacuum pump :wink: Was doing a little reading ,figured some here may have suggestion e.g. buy all in one or pump oven separate? Suggestion on good extractor any help would be good . Have say 10,000 dollar budget….RO 420

macky
Posts: 1459
Joined: Fri 14th Mar 2014 12:13 pm
Location: great white north

Re: BHO

Post by macky » Sat 17th Feb 2018 06:48 pm

never mind went close loop from company in Detroit for 30,000 :mrgreen:

CopenhagenCouple
Posts: 987
Joined: Thu 14th Jul 2016 10:49 am
Location: Take a wild guess...

Re: BHO

Post by CopenhagenCouple » Sat 17th Feb 2018 07:03 pm

Jeez, someone's​ got cash to spend :D hope it makes some great dabables :D :mrgreen:
Always know where your towel is! :wtf: :lol:

User avatar
OneHighMofo
Posts: 1469
Joined: Wed 25th Feb 2015 06:04 pm

Re: BHO

Post by OneHighMofo » Sat 17th Feb 2018 07:09 pm

They weren't interested in Rosin Macky?
I just dropped £500 on a pneumatic 10 tonne bench press with heated plates and am squising out rosin at 20-25%.
Big difference in cost!

Closed loop is the only way to play though, for safefy and purity reasons there's just no alternative - very cool setup 8)

macky
Posts: 1459
Joined: Fri 14th Mar 2014 12:13 pm
Location: great white north

Re: BHO

Post by macky » Sat 17th Feb 2018 10:40 pm

CopenhagenCouple wrote:
Sat 17th Feb 2018 07:03 pm
Jeez, someone's​ got cash to spend :D hope it makes some great dabables :D :mrgreen:
I was in for share for oven ,pump to use in edibles ,Then as you said guys with deep pockets jumped in :D
Will know where to find clean dabbales any way.

macky
Posts: 1459
Joined: Fri 14th Mar 2014 12:13 pm
Location: great white north

Re: BHO

Post by macky » Sat 3rd Mar 2018 04:14 pm

So it seem,s the group project fell apart :D
So me and a buddy going it alone ,where leaning toward a company from here Ledab.ca
5lb extractors closed loop is for sure ,vac pump and oven will be decided after consolation with company at retail location.
Now who can tell me where to get articles on making HBO,s any advice would help.
Seem,s like we will have samples for a few in July :wink:

RO 420 :mrgreen:

User avatar
RoMoney
Posts: 263
Joined: Thu 26th Oct 2017 10:58 pm
Location: EU

Re: BHO

Post by RoMoney » Mon 19th Mar 2018 02:48 pm

OneHighMofo wrote:
Sat 17th Feb 2018 07:09 pm
I just dropped £500 on a pneumatic 10 tonne bench press with heated plates and am squising out rosin at 20-25%.
Nice, was looking at the RTP Manual Twist Press with a mate, obviously wouldn't get the same returns as with a pneumatic one though, but easier if you're in an apartment.

https://www.rosintechproducts.eu/produc ... nual-twist

User avatar
OneHighMofo
Posts: 1469
Joined: Wed 25th Feb 2015 06:04 pm

Re: BHO

Post by OneHighMofo » Mon 19th Mar 2018 04:06 pm

RoMoney wrote:
Mon 19th Mar 2018 02:48 pm
obviously wouldn't get the same returns as with a pneumatic one though, but easier if you're in an apartment.

https://www.rosintechproducts.eu/produc ... nual-twist
Honestly dude I think you'll be surprised. I reckon that unit will be every bit as good.
I bought a standard 10 tonne bench press and some plates from Amazon and worked out pretty quickly that pressure rating is overkill. Haven't seen any further yield than what's available pressing at 5-6 tonnes on the guage.
Crack on - you won't be dissapointed; the biggest win so far (apart from being able to press up to 7g at a time)has been being able to press at lower temps than I could with hair straighteners preserving more taste.

User avatar
RoMoney
Posts: 263
Joined: Thu 26th Oct 2017 10:58 pm
Location: EU

Re: BHO

Post by RoMoney » Mon 19th Mar 2018 06:17 pm

OneHighMofo wrote:
Mon 19th Mar 2018 04:06 pm
RoMoney wrote:
Mon 19th Mar 2018 02:48 pm
obviously wouldn't get the same returns as with a pneumatic one though, but easier if you're in an apartment.

https://www.rosintechproducts.eu/produc ... nual-twist
Honestly dude I think you'll be surprised. I reckon that unit will be every bit as good.
I bought a standard 10 tonne bench press and some plates from Amazon and worked out pretty quickly that pressure rating is overkill. Haven't seen any further yield than what's available pressing at 5-6 tonnes on the guage.
Crack on - you won't be dissapointed; the biggest win so far (apart from being able to press up to 7g at a time)has been being able to press at lower temps than I could with hair straighteners preserving more taste.
Cool. encouraging to hear!

Post Reply

Return to “Headshops and Paraphernalia”