Idea: Lets Invent a Vaporizer Lighter

[Weedus]

I cant get the Idea out of my Head that i must be possible to make a Lighter which only produces Hot Air with around 170 Degrees of Celsius (Thc boils at 157,boiling just means it changes its status from solid to liquid to gas,and gas you can inhale )

Im thinking about one of this Torch Lighters who dont have a normal Yellow Flame,i mean the ones which have this blue "jet exhaust" type of Flame.
By adding some Pipe with Air Intakes over it it should be possible to reduce the temperature to the one needed.
This Pipe must be fitted over the already burning flame,otherwise it would produce some "bunsen" effect which could increase the temperature like on a Bunsenburner.

What do you think about that?? With such a Tool people could keep their normal Bongs but with a Vaporizer Effect.Pretty much like a simple version of a Verdamper Bong (which cost 389 Euros...)

[USbongLord]

you go ahead..have fun

[Alo]

I cant get the Idea out of my Head that i must be possible to make a Lighter which only produces Hot Air with around 170 Degrees of Celsius (Thc boils at 157,boiling just means it changes its status from solid to liquid to gas,and gas you can inhale )

Im thinking about one of this Torch Lighters who dont have a normal Yellow Flame,i mean the ones which have this blue "jet exhaust" type of Flame.
By adding some Pipe with Air Intakes over it it should be possible to reduce the temperature to the one needed.
This Pipe must be fitted over the already burning flame,otherwise it would produce some "bunsen" effect which could increase the temperature like on a Bunsenburner.

What do you think about that?? With such a Tool people could keep their normal Bongs but with a Vaporizer Effect.Pretty much like a simple version of a Verdamper Bong (which cost 389 Euros...)

It sounds like a good idea, it would turn any bong or pipe into a vape....
I'd buy one:)

[sensismiler]

....or you could just buy a lighter based vaporizer? the vaporgenie for example

[Alo]

....or you could just buy a lighter based vaporizer? the vaporgenie for example

I have a volcano already bro.
Just thought it was a novel idea

[sensismiler]

Oh yeah.. its definitely a workable idea, but it would be filling a niche that doesnt really need filling. Id probably buy one as well in all honesty. I use portables and its a bitch when I forget to charge them so a back up plan is always welcome!

[dude65]

What about the IOLITE? It runs on butane gas, no electricty required. OK, it's a little larger than a lighter, but very pocket compatible. I guess if it were feasible, they would have made it smaller.

[sensismiler]

I've heard too many people say that their iolite ignition switch is knackered to make me even consider one. It would certainly solve my charging problems though.

I just got the new pinnacle pro vape as well as my solo so theoretically there should always be a session left in one of them. Time will tell.

There are people out there who make vaporizers with heat guns which is kind of the same principle as a vape lighter so it should work. They would come in very handy for 'Dam trips. I haven't been since I started vaping and I don't like the idea of airport security getting funny about me carrying my prides of joy in my luggage. A lighter is a lighter... a vaporizer carries residue and smells.

[Weedus]

I dont mean a Lighter-Vaporizer,a thing with bowl and mouthpiece: NO
I just thought of a lighter which makes hot air in vaporizer temperature.

You would use it together with any pipe or Bong you like.It would turn your favorite Bong into a more healthy vaporizer (Vapo has 10 parts tar for 1 part cannabinoids,bong has 27 parts tar for 1 part cannabinoid...)

I think before i can start work i need one of this infrared temperate scale things,other Problem would be that the "cool down Pipe" would get very very hot and it would melt into plastic parts.

But it should be possible,with the right distance between heat source and nozzle one should be able to decrease the temperate to the one needed.We dont need or want a open Flame at the nozzle,just hot Air.
This lighters which have a blue "jet" flame should be perfectly suited for this already we just need a useable "cool down pipe" in correct length and a way to attach it safely without any melting or heating up the gas-reservoir in the lighter.But Clay or Ceramics could work good there.I guess Clay would work for the "Prototype"

[elasticband]

A lighter and a light bulb

Ever heard of the budder device? Its pretty much a lighter with a hot plate for smoking concentrates, I dont think it was ever mass produced outside BC though


see link for details - http://www.theherbcollective.com/phpBB3 ... =29&t=4020

[Weedus]

I made a little quick-draw of how simple i imagine this tool


http://imageshack.us/photo/my-images/823/ye6r.jpg/

[USbongLord]

yawn...phedor

[Weedus]

Lol i made that with Paint in a Minute
Just wanted to make sure everyone know what i mean when i talk of "cool down pipe" or the generel design cause some people thought i wanted to build a pocket vaporizer which was not the Idea.

My Idea is so cheap and simple i realy see no reason (besides the Bunsen Effect) why this should not work and generate Hot Air in the Temperate Degree of boiling THC.

[Slip & Sal]

http://www.emburlite.com/

Wouldn't it just be this.

[USbongLord]

Yup..same as a phedor whiteout the cord...I knew I've seen these already..it's been done..nice catch kids,and the tour got cancelled...lol,stoners