how do you get this stuff into the ecig??

General discussion about cannabis and coffeeshops.
Post Reply
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

how do you get this stuff into the ecig??

Post by dconstrukt »

so i got some wax or something similar from a friend of mine…. its not clear its more like peanut butter looking?

is it bubble hash?

dunno...

i wanted some stuff for my o-pen ecig…. and he got me this.

how the hell do you get it with the ecig liquid?

do you cook it with the liquid and let it melt together?

do you melt this stuff? (it's in wax paper, was $70 a gram)


User avatar
codejd
Posts: 1445
Joined: Mon 14th May 2007 05:19 pm
Location: The land of milk & honey.
Contact:

Re: how do you get this stuff into the ecig??

Post by codejd »

I think you can mix it down with some VG/PG (your choice) but, why?

I would pick up a different device like a G-Pen, etc. specifically made for "heavy waxes/oils" and alternate between the two.

On a side note I'm curious to know which type of oPen cartridge you prefer. I"m currently using a "Sativa - East Coast Alien" and am not nearly as impressed as I was with some of their other strains.
Donkey smell.
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

Re: how do you get this stuff into the ecig??

Post by dconstrukt »

codejd - hey dude… thanks.

when you say mix it down…. how? doesn't seem like it just melts if you put it with some of the ecig liquid.

i love that o-pen…. its so small vs the atmos and the liquid just works.

got it from cali… got sativa super silver haze one. ($50 at the dispensary)

i love it.

hits great.

haven't tried the other flavors cuz i bought like 5 carts… and vacuum sealed with some jolly ranchers… and my buddy wouldn't send it…. dickhead… lol.

so they're sitting at his place in cali. :-(
User avatar
codejd
Posts: 1445
Joined: Mon 14th May 2007 05:19 pm
Location: The land of milk & honey.
Contact:

Re: how do you get this stuff into the ecig??

Post by codejd »

dconstrukt wrote:codejd - hey dude… thanks.

when you say mix it down…. how? doesn't seem like it just melts if you put it with some of the ecig liquid.

i love that o-pen…. its so small vs the atmos and the liquid just works.

got it from cali… got sativa super silver haze one. ($50 at the dispensary)

i love it.

hits great.

haven't tried the other flavors cuz i bought like 5 carts… and vacuum sealed with some jolly ranchers… and my buddy wouldn't send it…. dickhead… lol.

so they're sitting at his place in cali. :-(
Yeah I was going to ask you to post a picture of what you have because I'm not sure you can (or want) to mix it down. We take QWISO and heat it up, mixing in some VG&PG until it gets nice & runny (like the oPen stuff) and then suck it up into a syringe and into a cartridge...we've even tried reusing some of the oPen cartridges for this purpose although we've found the disposable cartridges intended for tobacco are much better for this purpose.

The reason I say you wouldn't want to mix it down is obvious; you will be diluting your stuff even that much more which is not optimal to say the least.

I too like the oPen system for its stealth, ease and effect, but this particular strain seems weak. I bought about 20 of these while up in Colorado and since they were hard to find I had to settle for different strains (and sizes - they make like 3 different sized cartridges I think) so I am just now finding out which ones I prefer.
Donkey smell.
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

Re: how do you get this stuff into the ecig??

Post by dconstrukt »

well my cartridge is almost empty, so i can just pull the top off… and then add in more.

dont wanna add it in now till its all done.

so heat it up really low

add the pg/vg and then a bit of the 'stuff'… let it melt together

stir it a lot obviously

then put into syringe and squirt into the empty cart.
User avatar
codejd
Posts: 1445
Joined: Mon 14th May 2007 05:19 pm
Location: The land of milk & honey.
Contact:

Re: how do you get this stuff into the ecig??

Post by codejd »

dconstrukt wrote:well my cartridge is almost empty, so i can just pull the top off… and then add in more.

so heat it up really low
Yep, just hold the cartridge firmly and pull the mouthpiece off. There is a small plastic cap that allows access to the cartridge.

Remember this thread?
Donkey smell.
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

Re: how do you get this stuff into the ecig??

Post by dconstrukt »

ya not worried about how to put it in…. that takes 2 seconds...

more worried about taking this 'creamy peanut butter stuff' and getting it mixed with the ecig liquid and it working…
I melted that in double boiler setup using a shot glass a crockpot and some water. Once the hash melted, I added enough PG until the consistency got to a thick engine oil. I probably erred on the thick side, figuring I could always add more PG if necessary, but there was a point of no return I did not want to go over.

I sucked the mixture up into a syringe and then filled an iClear 16 with the thc-juice. I had some leftover so I stored it in an empty bottle.
so thats the way… good find.

need to get some vg and pg….
User avatar
codejd
Posts: 1445
Joined: Mon 14th May 2007 05:19 pm
Location: The land of milk & honey.
Contact:

Re: how do you get this stuff into the ecig??

Post by codejd »

dconstrukt wrote:need to get some vg and pg….
Try a local health food store for the VG, but I had to get the PG online.
Donkey smell.
sensismiler
Posts: 341
Joined: Mon 29th Aug 2011 07:39 pm
Location: South London

Re: how do you get this stuff into the ecig??

Post by sensismiler »

I'd like to try this but I don't like using iso and I don't have good enough equipment to purge properly. I've made bho before which as strong but very, very dirty. I wish I couk get grain alcohol...

Anyone know a way of using dry sift to make e juice? I understand that the hash will clog the carts but there must be a way without using nasty shit I wouldn't want to put in my body...
User avatar
codejd
Posts: 1445
Joined: Mon 14th May 2007 05:19 pm
Location: The land of milk & honey.
Contact:

Re: how do you get this stuff into the ecig??

Post by codejd »

sensismiler wrote:I wish I couk get grain alcohol...
Try the 190-proof Everclear, I think that's as close as you'll get.
Donkey smell.
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

Re: how do you get this stuff into the ecig??

Post by dconstrukt »

yup everclear.

thats what we use with magic butter machine.

works amazing
bigdaddyk
Posts: 204
Joined: Mon 1st Dec 2008 02:44 pm
Location: pile of shite uk

Re: how do you get this stuff into the ecig??

Post by bigdaddyk »

codejd wrote:
sensismiler wrote:I wish I couk get grain alcohol...
Try the 190-proof Everclear, I think that's as close as you'll get.


we don't get everclear in the UK
dam aint the only place in nl
User avatar
dconstrukt
Posts: 1109
Joined: Thu 12th Jun 2008 02:27 am
Location: Heading to the mothership â„¢
Contact:

Re: how do you get this stuff into the ecig??

Post by dconstrukt »

lol.. probably cuz uk is 99% alcoholics…. (especially the N. irish) LOL :-)
sensismiler
Posts: 341
Joined: Mon 29th Aug 2011 07:39 pm
Location: South London

Re: how do you get this stuff into the ecig??

Post by sensismiler »

lol.. I'd love to disagree with you but I just can't.

Yeah we don't get anything like that in the UK. I may have a go with iso out of curiosity but I wouldn't want to vape it regularly.
Post Reply