Page 2 of 3

Posted: Tue 23rd Mar 2010 05:02 pm
by Cisco
Nice one thanks for that ! i have about 3/4 plastic grinders and you can see the thc crystals heavily on them all ! :wink: i will give it a try when i get some ! cheers again

Posted: Mon 5th Apr 2010 04:31 pm
by spirit
done this on a number of occasions, as for letting it soak for an hour - no,no,no. this extracts alot of contaminates which you do not want. for me i think a minute is too long but i will usually do two washes at 20-30 secs each, shaking the jar vigorously during the wash as this helps break up the cell walls and release the goodness you are after.

after saying that i aint done qwiso for ages, its BHO all the way for me now, just because the taste and quality IMO is far superior than qwiso :wink:

Posted: Mon 5th Apr 2010 05:02 pm
by Twitch
Twitch wrote:Can you just use what's left over from vaping ?
Will have about an oz. in a little while and would like to try it out, but don't want to waste it as I know there are other things you can do with it, but they are more complicated.
All of the left over is from good Cali medicinal of varying strains.

Can any one answer this ??
Would really like to give it a try.

Posted: Mon 5th Apr 2010 10:03 pm
by spirit
Twitch wrote:
Twitch wrote:Can you just use what's left over from vaping ?
Will have about an oz. in a little while and would like to try it out, but don't want to waste it as I know there are other things you can do with it, but they are more complicated.
All of the left over is from good Cali medicinal of varying strains.

Can any one answer this ??
Would really like to give it a try.
hi twitch, although i've never personally tried it with vaped weed i dont see why not. i know you can make cannabutter no probs with it

i would advise you to try a little bit at first and see how it goes - say try it with a 1/4 oz first, if all okay then your good to go

e2a: spelling

Posted: Tue 6th Apr 2010 04:17 pm
by ZBeebs
spirit wrote:
Twitch wrote:
Twitch wrote:Can you just use what's left over from vaping ?
Will have about an oz. in a little while and would like to try it out, but don't want to waste it as I know there are other things you can do with it, but they are more complicated.
All of the left over is from good Cali medicinal of varying strains.

Can any one answer this ??
Would really like to give it a try.
hi twitch, although i've never personally tried it with vaped weed i dont see why not. i know you can make cannabutter no probs with it

i would advise you to try a little bit at first and see how it goes - say try it with a 1/4 oz first, if all okay then your good to go

e2a: spelling
Yes, you can. I have about a pound of vape duff that I'm going to turn into QWISO. I expect it to be very CBD heavy, since the vape extracts much of the THC but leaves behind some of the other cannabinoids.

I did a soak of my vaporizer whip last weekend, and got a nice amount of what is more like oil than a solid...Which makes sense because the stuff in the whip is entirely condensed vapor. It's very potent.

Posted: Tue 6th Apr 2010 05:34 pm
by Twitch
Thanks for the response guys.
Am going to let my supply bulid up a little more than give it a try.
Will report back after.

Posted: Wed 7th Apr 2010 05:41 am
by ZBeebs
I just want to say again that if you have vaporizer parts, make QWISO with them. The QWISO oil I made from my vape whip is absolutely killer. A little bit wiped on a bit of bud and pulled through my bong has me soaring right now.

Buildup from a vape downstream from the heat source is not like pipe resin - it is condensed vapor. Vapor is very high in THC and doesn't contain any crap, as such the end result is some very high quality stuff. WWWHHHHEEEEEEEEEE!!!

Posted: Wed 7th Apr 2010 10:19 am
by spirit
ZBeebs wrote:I just want to say again that if you have vaporizer parts, make QWISO with them. The QWISO oil I made from my vape whip is absolutely killer. A little bit wiped on a bit of bud and pulled through my bong has me soaring right now.

Buildup from a vape downstream from the heat source is not like pipe resin - it is condensed vapor. Vapor is very high in THC and doesn't contain any crap, as such the end result is some very high quality stuff. WWWHHHHEEEEEEEEEE!!!
interesting mate, would butane work as well as iso do you think??

Posted: Wed 7th Apr 2010 11:03 pm
by Twitch
[/quote]

Yes, you can. I have about a pound of vape duff that I'm going to turn into QWISO. I expect it to be very CBD heavy, since the vape extracts much of the THC but leaves behind some of the other cannabinoids.

I did a soak of my vaporizer whip last weekend, and got a nice amount of what is more like oil than a solid...Which makes sense because the stuff in the whip is entirely condensed vapor. It's very potent.[/quote]

Found a video about making " Wand Hash "
Doesn't involve using iso, just manuel labor.
I use a Volcano, so no use to me.

http://www.youtube.com/watch?v=2cHBsy3X ... r_embedded

Posted: Sat 10th Apr 2010 11:28 am
by indk
Just jumping in about the evaporation....use a bowl of boiling hot water, placing the other bowl of alcohol on top. Place near a window for around 10 minutes, if less. Kind of how you would melt chocolate as a kid :P

Posted: Sun 16th May 2010 09:01 am
by angry pirate
So, has anyone tried this on their grinders since reading this?
I'm about to give it a go today with four well used metal jobs with screens.
I've only a small apartment so would i be better off doing it out on the balcony? (don't worry, no one can see, 8) ) I'm guessing it might stink, yeah?
Cheers.

Posted: Sun 16th May 2010 10:35 am
by spirit
angry pirate wrote:So, has anyone tried this on their grinders since reading this?
I'm about to give it a go today with four well used metal jobs with screens.
I've only a small apartment so would i be better off doing it out on the balcony? (don't worry, no one can see, 8) ) I'm guessing it might stink, yeah?
Cheers.
i'v used iso on grinders in the past mate, it works quite well. i would also advise using your balcony as it will stink to high heaven plus it is flammable so best not to have the fumes wafting about your flat just to be on safe side :wink:

Posted: Mon 17th May 2010 04:44 pm
by Cisco
angry pirate wrote:So, has anyone tried this on their grinders since reading this?
I'm about to give it a go today with four well used metal jobs with screens.
I've only a small apartment so would i be better off doing it out on the balcony? (don't worry, no one can see, 8) ) I'm guessing it might stink, yeah?
Cheers.
How did you get on then lad ? i have been wanting to try this !

Posted: Tue 14th Sep 2010 02:34 pm
by Cisco
Well i eventually tried this , just washed out my grinders :lol: shall try it again when i get more green and use the trim :wink: cheers peeps

Image
Image
Image

Posted: Wed 15th Sep 2010 12:40 pm
by puffpuffgive
f**king yum. bet that got you high as a kite :P :D