B.H.O. talk to me!

[Midzy]

OK I am an oil virgin I have never tried or made the stuff before, so any info would really useful
first off am I better off buying parts to make my own exctractor? or should I buy a ready made honey bee thing?
£22 looks a bit steep to me for a plastic tube?

ok I think I should do the "work" outside cos I dont wanna blow up BUT does it smell of weed when yer doing it?

this oil stuff when yer get it.... whats it smoke like? is it harsh on the throat? how does it taste? whats the stone like? does the buzz last long? cheers you lot

[USbongLord]

please, PLEASE,find someone who does it and watch the procedure and ask tons of questions...i wouldnt feel right giving you too much info ,because it is dangerous and there are proper techniques and protocols to follow to be totally safe..you seem like a nice person and i dont wanna see ya get hurt...certainly not making oil...i posted a pic of my rig a few weeks ago..easy safe and 6 dollars..i do double runs,,two at once cause im a lunitic...i learned by watching ten different people make it and took the best of what i learned and applied it to my product...now once ya get the basics and do a few runs.ill teach ya the spoon technique and youll be crushin the gods with yer stuff...good luck and be careful...i know this isnt what ya wanted but i thought i would try to steer ya in the right direction

[wileykat]

im the same pal, dying to try it. i think ima go for the make my own kit approach, with piping from a plumbers place with 2 end caps on, one with 1 hole for the bute to go in, the other with multiple holes to release the goodness. i will only be using this kit once as slightly worried about what other crap the bute might strip from the plastic itself. planning to try putting together a glass kit at a later date depending on how good my 1st batch is, and how much that will cost to build.

am i right in assuming the iso stuff (using the 99.9% alcohol) is no way near as good as hbo yeah?..... or should i try that technique 1st, walk before i run?

any / all advice welcome guys,.... PLEASE!!!

[NIZZLE]

If you've never made a concentrate before, i'd do an Iso run first..its real easy and you don't need any special tubes..in fact you can get everything you need bar the iso from tesco. So all in all an easy place to start. (you can get the Iso from ebay or amazon if your stuck for it)..Anyway all you need to know to do the process is HERE:

HOW TO MAKE QWISO. https://www.coffeeshopdirect.com/forum/viewt ... =9&t=16731

Enjoy... and remember a well made Iso will get you super high..it certainly takes you onto that upper level of wreckness that you get from a concentrate. Ok its not Birminator or Spoon but it'll get you close to that feeling. Enjoy

[Dava]

im the same pal, dying to try it. i think ima go for the make my own kit approach, with piping from a plumbers place with 2 end caps on, one with 1 hole for the bute to go in, the other with multiple holes to release the goodness. i will only be using this kit once as slightly worried about what other crap the bute might strip from the plastic itself. planning to try putting together a glass kit at a later date depending on how good my 1st batch is, and how much that will cost to build.

am i right in assuming the iso stuff (using the 99.9% alcohol) is no way near as good as hbo yeah?..... or should i try that technique 1st, walk before i run?

any / all advice welcome guys,.... PLEASE!!!

get the plastic pipe that plumbers/gas guys use for temporarily providing gas to boilers etc.. that should strip anything as its designed to carry gas!

[Midzy]

please, PLEASE,find someone who does it and watch the procedure and ask tons of questions...i wouldnt feel right giving you too much info ,because it is dangerous and there are proper techniques and protocols to follow to be totally safe..you seem like a nice person and i dont wanna see ya get hurt...certainly not making oil...i posted a pic of my rig a few weeks ago..easy safe and 6 dollars..i do double runs,,two at once cause im a lunitic...i learned by watching ten different people make it and took the best of what i learned and applied it to my product...now once ya get the basics and do a few runs.ill teach ya the spoon technique and youll be crushin the gods with yer stuff...good luck and be careful...i know this isnt what ya wanted but i thought i would try to steer ya in the right direction

Thank you USBL and you seem like a nice person too, and thanks for your concern I dont sadly have any friends who do this so I draw a blank here but I have read all I can find on the web plus watched youtube vids, now I am a bit of a risk taker in genaral, done some crazy shit in my crosser lol, but I am not young and daft any more so would like to do the "work" safley so any help you can give with your experience would be much appreseiated I was thinking of using this method rarther then the honey bee http://www.uk420.com/boards/index.php?showtopic=155748

or would I be better making holes at each end like a honey bee and let the gas flow straight through?

[Midzy]

If you've never made a concentrate before, i'd do an Iso run first..its real easy and you don't need any special tubes..in fact you can get everything you need bar the iso from tesco. So all in all an easy place to start. (you can get the Iso from ebay or amazon if your stuck for it)..Anyway all you need to know to do the process is HERE:

HOW TO MAKE QWISO. https://www.coffeeshopdirect.com/forum/viewt ... =9&t=16731

Enjoy... and remember a well made Iso will get you super high..it certainly takes you onto that upper level of wreckness that you get from a concentrate. Ok its not Birminator or Spoon but it'll get you close to that feeling. Enjoy

thanks NIZZLE yeah I have done QWISO a fair bit its just the oil I have never had or made and at my age I think I should lose my virginity on this stuff.

[Boner]

Dont see the point in that thermos flask method myself, the idea of the extractor way is for the butane to run through catching the trikes as it passes.

To be honest it isn't rocket science and it isn't really that dangerous as long as you're careful and just remember you're using a very flammable gas.

Edit: Bho kicks iso square in the nuts and says fuck off weakling.

[wileykat]

@Nizzle,.... Yeah thats the one I considered following 1st, nice one, seems a tad easier.
Is Birminator your creation? U from Brum yeah?


@Dava,.... Good point on the plumbing supplies, so it should be ok for more than a single use yeah? P.s...... PM being sent to you, hope you don't mind.

So,.... If I dont get my plumbing supplies in before I get enough twigNleaf together then I might try the ISO, otherwise I reckon its the BHO for me too.


..... & Midzy, hope you didn't mind me jumping in on your thread pal. Thank you.

[Midzy]

Dont see the point in that thermos flask method myself, the idea of the extractor way is for the butane to run through catching the trikes as it passes.

To be honest it isn't rocket science and it isn't really that dangerous as long as you're careful and just remember you're using a very flammable gas.

Edit: Bho kicks iso square in the nuts and says fuck off weakling.

Thanks Boner so you think I would be best to make holes each end like the honey bee?

I am doing this work in about 20 mins so any last minute advice would be great

OK so the danger is blowing up? or inhaling gas? ok so I work outside. will the people nextdoor smell my oil/weed when making it?

[Boner]

Yeah I'd just make something that uses the same principal of the honeybee or the okief http://okief.com/bho1.html - I think the okief is the better of the 2 as well.

[Midzy]

@Nizzle,.... Yeah thats the one I considered following 1st, nice one, seems a tad easier.
Is Birminator your creation? U from Brum yeah?


@Dava,.... Good point on the plumbing supplies, so it should be ok for more than a single use yeah? P.s...... PM being sent to you, hope you don't mind.

So,.... If I dont get my plumbing supplies in before I get enough twigNleaf together then I might try the ISO, otherwise I reckon its the BHO for me too.


..... & Midzy, hope you didn't mind me jumping in on your thread pal. Thank you.

no mate not at all you are very welcome

[Boner]

http://www.thcfarmer.com/forums/f60/bho ... hread-185/

I've posted this before but it has to be one of the best threads anywhere, some of the stuff people are making is unreal.

[NIZZLE]

@Midzy..i understand man..bho is awesome.

@Whileykat..No dude thats Kermits creation, i just had the pleasure of sampling it once.

[The_Kushler]

I know it wont be the same. But is anything like ISO or BHO available in Dam? and where? lol.
What sort of buzz do u get from the stuff? I know nothing about this shizzel